Allen Adams, PE, SE, Bentley Systems, Inc. / RAM

In May 2020, SE University welcomed Allen Adams, PE, SE, from Bentley Systems, Inc. / RAM, to present 2020 Practical Strategies for the Modeling and Analysis of Diaphragms. Allen designated Operation HOPE – North County (https://www.operationhopeshelter.org/) for our SEU Speaker Inspires donation for the month.

The mission of Operation HOPE – North County is to provide a safe and supporting environment for families with children and single women who are experiencing homelessness as they rebuild their lives.

Allen shared, “Over the years I have had the privilege of seeing their good work, having worked on service projects with the Boy Scouts and through church that benefitted that organization. They provide a much needed service for a vulnerable group of people.”

Thank you, Allen, for helping structural engineers with your SE University session, and for your designation of Operation HOPE – North County as our SEU Speaker Inspires Organization of the Month!

SE University began the SEU Speaker Inspires program in 2015 as a way to “pay it forward”, enabling our speakers to designate a charity/organization of their choice for SE University to make a donation to help improve our world.

When designing large roof deck diaphragms, the shear requirements at the perimeter often far exceed those in the field, so much so that the more commonly used lighter gage decks and typical attachment designs can be inadequate.  What is the best way to increase the deck diaphragm shear strength while also minimizing any cost increases?

In June 2018, Keith Cullum, PE, from Simpson Strong-Tie gave a presentation on Steel Deck Diaphragm Attachment. Keith reviewed the function and components of a steel deck diaphragm and compared common attachment methods. He also talked about appropriate standards and building code references and frequent challenges associated with designing steel deck diaphragms.  At the end of the session, a question was asked about the best approach to increasing the deck diaphragm shear capacity in the most cost-effective manner.  Watch this short video to hear Keith explain his step-wise strategy to increasing shear capacities.

To learn more about steel deck attachment and access additional design resources, please review our other blog post about Steel Deck Diaphragm Calculators and Resources from Keith Cullum’s SE University session.

SE Solutions would like to do our part to help others in need given this extremely difficult time for many people across the country.  In response to the many Americans facing unemployment and economic hardship as a result of the coronavirus outbreak, SE Solutions would like to assist others in need through Feeding America.

The Feeding America network is the nation’s largest domestic hunger-relief organization.  Feeding America is working hard to meet the increased demand on local food banks throughout the country.

Therefore, for anyone willing to make any donation to Feeding America (https://www.feedingamerica.org/about-us/press-room/feeding-america-establishes-covid-19-response-fund-help-food-banks-during), we will contribute $100.00 for each donation, up to a total of $3000 from SE Solutions.  Simply email [email protected] and let us know you contributed.  We would like to acknowledge those who contributed in our newsletter and on our blog, so please let us know if you would like to be acknowledged.

Thank you for being part of our SE Solutions community and we hope everyone is staying safe and healthy.

Steel fiber reinforced concrete (SFRC) is still somewhat new to many structural engineers, but its uses are gaining in popularity, and structural engineers should become more familiar with its use, design, and practical applications.  Clients are always looking for new, innovative, and cost effective solutions, and SFRC may be the answer on your next project.

In the February 2020 SE University session, Claire Gandee, from Bekaert, presented Steel Fiber Reinforced Concrete.  Claire reviewed the basics of steel fiber reinforced concrete (SFRC) and covered the applicable code references for the design of SFRC.  She also covered the design approaches typically used for SFRC and made practical recommendations for specifying and for the placement/finishing of SFRC.  Claire explained the benefits of using SFRC including possible economic savings.

Claire reviewed many of the practical aspects of placing and finishing when using SFRC.  To hear Claire cover many of her frequently asked questions about SFRC, watch this short 4 minute video:

Matthew Rechtien, PE, Esq., Walter P. Moore

In March 2020, SE University welcomed Matthew Rechtien, PE, Esq., from Walter P. Moore, to present 2020 Engineering Ethics Update.  Matt designated Friends of Perryville Battlefield (https://www.friendsofperryville.org) for our SEU Speaker Inspires donation for the month.

Matt shared, “On October 8, 1862, nearly 8,000 Americans fell in the drought-parched Chaplin Hills of Kentucky during the Battle of Perryville. Perryville played a pivotal role in our nation’s most impactful event. Although the clash is oft-forgotten, those Americans should be remembered and that sacred ground, one of the most pristine civil war battlefields remaining, should be protected. The Friends of Perryville Battlefield is committed to both missions, which I am humbled to advance.”

Thank you, Matt, for helping structural engineers with your SE University session, and for your designation of Friends of Perryville Battlefield as our SEU Speaker Inspires Organization of the Month!

SE University began the SEU Speaker Inspires program in 2015 as a way to “pay it forward”, enabling our speakers to designate a charity/organization of their choice for SE University to make a donation to help improve our world.

Steel fiber reinforced concrete (SFRC) is gaining in popularity, especially in designs for industrial slabs on grade.  Steel fibers can add strength and increase fatigue resistance, impact resistance, and crack control which make it ideal for large scale slabs where the use of welded wire fabric can be eliminated.  The addition of steel fibers may be an economical option, but if you’ve never used them, you might wonder what is the best method to properly specify SFRC?

In the February 2020 SE University session, Claire Gandee, from Bekaert, presented Steel Fiber Reinforced Concrete.  Claire reviewed the basics of SFRC and covered the applicable code references for design.  She also covered the design approaches typically used for SFRC and made practical recommendations for specifying and for the placement/finishing of SFRC.  Claire explained the benefits of using SFRC, including possible economic savings.

Claire shared the critical information that should be included when specifying SFRC.  However, it is most important to be sure the contractor and others on the project can readily find the information, and this is best achieved by including it in the specs within the 03 33 00 Cast In Place Reinforcing or alternately within the 03 24 00 Fibrous Reinforcing, including a reference in the 03 33 00 section to be sure it is not missed by the contractor.  ASTM C1116 is a standard specification for Fiber Reinforced Concrete which can be referenced in supplement to performance and material properties of the steel fibers utilized in a project.

Within the specs, the following performance and material requirements should be delineated:

Claire also provided typical drawing notes that give examples of specifying SFRC on construction documents:

These examples provide a good basis to get started using SFRC on projects where performance improvements help the end-user, and/or when it can save time and money for clients.  While steel fiber reinforcing may be new to some, open communication with the contractor and manufacturer can eliminate any mishaps when using SFRC on your first project.

Claire Gandee, Bekaert

In February 2020, SE University welcomed Claire Gandee, from Bekaert, to present Steel Fiber Reinforced Concrete. Claire designated The Dharma Project (https://www.thedharmaproject.org/) for our SEU Speaker Inspires donation for the month.

Claire shared, “This group brings yoga, meditation and mindfulness to folks who might otherwise have no access to these valuable practices, such as police officers, incarcerated youth, and inner-city school students. I believe in the value and benefits of this work and hope that more people can experience the important work the Dharma Project offers.”

Thank you, Claire, for helping structural engineers with your SE University session, and for your designation of The Dharma Project as one of our SEU Speaker Inspires Organizations of the Month!

SE University began the SEU Speaker Inspires program in 2015 as a way to “pay it forward”, enabling our speakers to designate a charity/organization of their choice for SE University to make a donation to help improve our world.

SE University / SE Solutions is pleased to support Project C.U.R.E. and their efforts in collecting and donating all of their available medical supplies to combat the Covid-19 crisis throughout America and globally.

Project C.U.R.E. identifies, solicits, collects, sorts and distributes medical supplies and services according to the imperative needs of the world.  In response to COVID-19, Project C.U.R.E. is making their resources available to hospitals and first responders throughout the United States.  They are donating all of their masks, gloves, PPE’s and other items needed to fight COVID-19 to these heroes. One hundred percent of the items that individuals and companies give to the local fight against COVID-19 will be given to the brave men and women on the front lines of this fight in our communities here in the U.S..

Learn more about Project C.U.R.E at www.projectcure.org or donate to support their relief efforts here.

Have you encountered fit-up problems in the field for fillet welded connections?  What has been your solution? AWS D1.1 requires that the engineer approve any alternative acceptance criteria for production welds, but the Code only provides general stipulations applicable to most situations.  Finding an acceptable alternative for fit-up issues often plagues engineers, however in the Second Edition of Design Guide 21: Welded Connections, Chapter 15.4.2 offers solutions for out-of-tolerance weld joints.

In the August 2019 SE University session,  Duane Miller, PE, from The Lincoln Electric Company, presented Introducing Design Guide 21: Welded Connections (Second Edition).  Duane covered some unique requirements for special welding applications, suggested potential solutions to frequently encountered problems associated with welded construction, and reviewed the approach used in AWS D1.1 to address unusual situations and the role of the EOR.

Duane addressed how out of tolerance fillet weld joints might be handled according to Design Guide 21.  Watch this short 4 minute video to hear Duane discuss buttering and changing the fillet weld to a CJP groove weld as two solutions for out-of-tolerance fillet weld joints.